Thermador POD301W Instruction manual - Page 18
Setting a Heating Mode
View all Thermador POD301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Kitchen Timer The Kitchen Timer can be set when the appliance is switched on or off. 1. Touch the TIMERS touch button. The kitchen timer is shown in the display. If the appliance is switched on, first touch the . field. 2. Swipe to the left or right to select the timer value. You can set hours, minutes and seconds. +RXUV 0LQXWHV 6HFRQGV 3. Touch the 8 icon. The kitchen timer begins to count down. The . symbol and timer value are displayed in the top left corner of the display. Note: When the set time has elapsed, a signal sounds. "Kitchen Timer completed" is displayed. Delayed Operation - "End time" The appliance switches on automatically, then off at the time preselected for the end of operation. To do this, you set the cooking time and specify the end of operation. Delayed operation can only be used in combination with a heating mode. Notes ▯ Ensure that food is not left in the oven cavity for too long, as it may spoil. ▯ The option to delay the start of operation is not available for every heating mode. 9 CAUTION To maintain food safety, do not leave food in the oven for more than one hour before or after cooking. 1. Place the food onto the appropriate accessory in the oven cavity and close the appliance door. 2. Set the heating mode with the rotary selector. 3. Touch the TIMERS touch button. The timer options are shown in the display. 4. Select Oven Timer and set a cook time. Touch the 8 icon. 5. Select TIMERS again and set an End Time. Touch the 8 icon. 6. Select the temperature with the rotary selector. The appliance waits until the appropriate time to start the operation. As soon as the end time has been reached, an audible signal sounds and the appliance ends the operation automatically. 18 Checking, changing or deleting settings 1. Touch the TIMERS touch button. The time-setting options are shown in the display. 2. Touch the required timer option. 3. Swipe to the left or right on the touch display to change the settings. To delete a timer value, set "00:00", or touch "Cancel". Setting a Heating Mode Use the function selector and temperature selector to set the operating mode and temperature. Use the touch buttons and the touch fields on the touch screen to enter the different operating menus. Example: True Convection with 325° F (160 °C) 1. Turn the function selector to TRUE CONV to switch on the appliance. You go directly to the True Convection mode. 2. Turn the temperature selector to the required temperature. 7UXH&RQYHFWLRQ ³ 3. After a few seconds the appliance starts operating. For heating modes that require a preheat the status bar appears in the display to indicate the preheating progress. 7UXH&RQYHFWLRQ ³ 4. When the appliance has reached the set temperature, "Oven preheated" is displayed and an audible signal sounds. The oven continues cooking with the set temperature.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88