Thermador POD301W Instruction manual - Page 21
Poultry, Turning the food, Setting and Starting Appliance Operation, WARNING, Notes, Changing or
![]() |
View all Thermador POD301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Meat: For large pieces of meat, insert the meat probe at an angle from above as far as it will go into the meat. For relatively thin pieces of meat, insert the meat probe from the side at the thickest point. 9 WARNING RISK OF ELECTRIC SHOCK Use of a wrong meat probe can damage the insulation. Use only the meat probe intended for this appliance. Poultry: Insert the meat probe as far as it will go into the thickest point in the breast. Insert the meat probe into the poultry crosswise or lengthwise depending on its structure. Put the chicken in a roasting dish and place it on the wire rack. Turning the food: If you wish to turn the food, do not unplug the meat probe from the oven. Once you have turned the food, check that the meat probe is correctly repositioned in the food. If you unplug the meat probe from the oven, all settings will be reset and you will have to apply them again. NOTICE: Ensure that the meat probe's cable does not become trapped. To prevent the meat probe from being damaged by excessive heat, there must be a gap of at least an inch or more between the broil element and the meat probe. The meat may expand during the cooking process. Setting and Starting Appliance Operation 9 WARNING RISK OF BURNS The oven interior and the meat probe become very hot. Use oven mitts to plug and unplug the meat probe. Notes ▯ The set oven cavity temperature must be at least 50° F (10 °C) higher than the meat probe temperature. ▯ To prevent the meat probe from being damaged, the oven cavity temperature must not be set higher than 480° F (250 °C). 1. Insert the meat probe into the socket on the left-hand side of the oven cavity. Note: The probe icon will appear on the oven display screen. 2. Close the appliance door. NOTICE: When doing so, ensure that the meat probe's cable is not trapped in the appliance door. It may be damaged. 3. Set the heating mode. Note: When the meat probe is plugged into the socket, you can only select a heating mode that is suitable to be used with the meat probe. 4. Set the oven cavity temperature with the temperature selector. 5. Touch the ¥ core temperature on the right in the bottom line. 6. Swipe to the left or right to select the required core temperature. After a few seconds the appliance starts the operation. Changing or Stopping the Appliance Operation Changing: During appliance operation, you can change the oven cavity temperature and meat probe temperature. 1. Change the oven cavity temperature with the temperature selector. 2. Touch the meat probe temperature. 3. Swipe to the left or right to change the meat probe temperature. 4. Touch the 8 symbol to apply the setting. Stopping: Once the set meat probe temperature has been reached, a signal sounds and the appliance stops the operation automatically. 1. Turn the temperature selector and the function selector to OFF to switch off the appliance. 2. Using an oven glove, unplug the meat probe from the socket. 21
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
![]() |
![]() |
![](/manual_guide/products/thermador-pod301rw-instruction-manual-57083dc/21.png)