Thermador POD302RW Instruction manual - Page 27

Remove Drawer Insert

Page 27 highlights

Remove Drawer Insert Note: The pictures show a warming drawer model with handel. Depending on the appliance model, individual details may differ. 1. Open the drawer fully. 4. Once the insert has been removed it can be located to a more suitable location for cleaning using methods outlined in the chapter on Cleaning in this manual. 2. Grasp the overhanging flange of the insert about midway on each side of the drawer and lift it for approx. 2" (3 cm).   5. With the insert removed, the drawer base can be cleaned if necessary. Special care must be taken to prevent any damage to the now exposed heating element below the drawer insert. It is also not recommended to remove any more housing panels at this point. If additional issues remain at this point, contact Customer Service. 9 WARNING RISK OF BURNS Do not operate the Warming Drawer without the insert. The heating elements will become very hot and might cause injury. 3. While holding the insert up rotate the front of the insert upward to clear the front inside of the drawer. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

27
Remove Drawer Insert
Note:
The pictures show a warming drawer model with
handel. Depending on the appliance model, individual
details may differ.
1.
Open the drawer fully.
2.
Grasp the overhanging flange of the insert about
midway on each side of the drawer and lift it for
approx. 2" (3 cm).
3.
While holding the insert up rotate the front of the insert
upward to clear the front inside of the drawer.
4.
Once the insert has been removed it can be located to
a more suitable location for cleaning using methods
outlined in the chapter on Cleaning in this manual.
5.
With the insert removed, the drawer base can be
cleaned if necessary. Special care must be taken to
prevent any damage to the now exposed heating
element below the drawer insert. It is also not
recommended to remove any more housing panels at
this point.
If additional issues remain at this point, contact Customer
Service.
9
WARNING
RISK OF BURNS
Do not operate the Warming Drawer without the
insert. The heating elements will become very hot
and might cause injury.