Thermador PRG305PH Design Guide - Page 5

Planning Information - manual

Page 5 highlights

PRO HARMONY® RANGES PLANNING INFORMATION MODEL OPTIONS There are three sizes of Thermador Pro Harmony Ranges to choose from - 30-inch, 36-inch and 48-inch. All models are available in your choice of allgas or dual-fuel con gurations. Pro Harmony Ranges feature a compact, 24-inch deep design in stainless steel with porcelain cooktop surface. Dual-fuel models are LP convertible by ordering PALPKITHC. All-gas models are available in Natural Gas or Liquid Propane and should be ordered separately from the factory. Be sure to reference the correct model information in this design guide. INSTALLATION CONSIDERATIONS The information in this design guide provides key features, product dimensions, cutouts and installation speci cations. Before installing a Thermador Pro Harmony Range, be sure to verify the cutout dimensions and electrical / gas connections. Also, always consult with the installation manual packed with the product for complete details before installing. ELECTRICAL AND GAS SPECIFICATIONS Be sure your appliance is properly installed and grounded by a quali ed technician. Installation, electrical and gas connections, and grounding must comply with all applicable local codes. Verify that the type of gas being used at the installation site matches the type of gas used by the appliance. If an LP kit is utilized (PALPKITHC), conversion from natural gas to propane must be done by quali ed service personnel only. Please refer to the LP Conversion Instructions packed with product for further information. A manual gas shut-off valve must be installed external to the appliance, in a location accessible from the front, for the purpose of shutting off the gas supply. The supply line must not interfere with the back of the unit. Inlet Connection: 3/4" NPT external, 1/2" NPT internal (Minimum 3/4" diam. ex line.) Supply Pressure: 6" min. to 14" max. water column. (14.9 mb to 34.9 mb) Manifold Pressure: 5" water column (12.5 mb) Inlet Connection: 3/4" NPT external, 1/2" NPT internal (Minimum 3/4" diam. ex line.) Supply Pressure: 11" min. to 14" max. water column. (27.4 mb to 34.9 mb) Manifold Pressure: 10" water column (24.9 mb) DUAL-FUEL: Thermador Pro Harmony Dual-Fuel Ranges are dual rated, designed to be connected to either 240/208V AC, 60 Hz, 4-wire, single-phase power supply. The connection may be made with a range supply cord kit (purchased separately) or by hard-wiring to the power supply. A dedicated circuit breaker is required. MODEL PRD304GHU PRD364GDHU PRD366GHU PRD486GDHU REQUIRED CIRCUIT BREAKER 240/208V AC, 60 Hz 35 Amp 35 Amp 35 Amp 50 Amp ALL-GAS: Thermador Pro Harmony All-Gas Ranges are equipped with a 3-wire plug and are designed to be connected to a 120V AC, 60 Hz, single-phase power supply. A dedicated circuit breaker is required. MODEL PRG304GH PRL304GH PRG366GH PRL366GH PRG364GDH PRL364GDH PRG486GDH PRL486GDH REQUIRED CIRCUIT BREAKER 120V AC, 60 Hz 15 Amp 15 Amp 15 Amp 15 Amp 20 Amp 20 Amp 20 Amp 20 Amp IMPORTANT: The cord supplied with gas ranges having an electric griddle requires a NEMA 5-20 receptacle as shown here. Local codes may require a different wiring method. A dedicated 20 Amp service is required for proper operation. PLUG NEMA 5-20 RECEPTACLE 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

42
PRO HARMONY
®
RANGES
PLANNING INFORMATION
MODEL OPTIONS
There are three sizes of Thermador Pro Harmony
Ranges to choose from — 30-inch, 36-inch and
48-inch. All models are available in your choice of all-
gas or dual-fuel configurations. Pro Harmony Ranges
feature a compact, 24-inch deep design in stainless
steel with porcelain cooktop surface. Dual-fuel models
are LP convertible by ordering PALPKITHC. All-gas
models are available in Natural Gas or Liquid Propane
and should be ordered separately from the factory. Be
sure to reference the correct model information in this
design guide.
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador Pro
Harmony Range, be sure to verify the cutout dimensions
and electrical / gas connections. Also, always consult
with the installation manual packed with the product for
complete details before installing.
ELECTRICAL AND GAS SPECIFICATIONS
Be sure your appliance is properly installed and
grounded by a qualified technician. Installation,
electrical and gas connections, and grounding must
comply with all applicable local codes.
Verify that the type of gas being used at the installation
site matches the type of gas used by the appliance. If an
LP kit is utilized (PALPKITHC), conversion from natural
gas to propane must be done by qualified service
personnel only. Please refer to the LP Conversion
Instructions packed with product for further information.
A manual gas shut-off valve must be installed external
to the appliance, in a location accessible from the front,
for the purpose of shutting off the gas supply. The
supply line must not interfere with the back of the unit.
Inlet Connection:
3
/
4
" NPT external,
1
/
2
" NPT internal
(Minimum
3
/
4
" diam. flex line.)
Supply Pressure: 6" min. to 14" max. water column.
(14.9 mb to 34.9 mb)
Manifold Pressure: 5" water column (12.5 mb)
Inlet Connection:
3
/
4
" NPT external,
1
/
2
" NPT internal
(Minimum
3
/
4
" diam. flex line.)
Supply Pressure: 11" min. to 14" max. water column.
(27.4 mb to 34.9 mb)
Manifold Pressure: 10" water column (24.9 mb)
DUAL-FUEL:
Thermador Pro Harmony Dual-Fuel Ranges are dual rated, designed to
be connected to either 240/208V AC, 60 Hz, 4-wire, single-phase power
supply. The connection may be made with a range supply cord kit (purchased
separately) or by hard-wiring to the power supply. A dedicated circuit breaker
is required.
ALL-GAS:
Thermador Pro Harmony All-Gas Ranges are equipped with a 3-wire plug
and are designed to be connected to a 120V AC, 60 Hz, single-phase power
supply. A dedicated circuit breaker is required.
IMPORTANT:
The cord supplied with gas ranges having an electric griddle
requires a NEMA 5-20 receptacle as shown here. Local codes may require a
different wiring method. A dedicated 20 Amp service is required for proper
operation.
MODEL
REQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
PRG304GH
15 Amp
PRL304GH
15 Amp
PRG366GH
15 Amp
PRL366GH
15 Amp
PRG364GDH
20 Amp
PRL364GDH
20 Amp
PRG486GDH
20 Amp
PRL486GDH
20 Amp
MODEL
REQUIRED CIRCUIT BREAKER
240/208V AC, 60 Hz
PRD304GHU
35 Amp
PRD364GDHU
35 Amp
PRD366GHU
35 Amp
PRD486GDHU
50 Amp
NEMA 5-20
RECEPTACLE
PLUG