Thermador SGS305TS Installation instructions - Page 12
Install Burner Grates
View all Thermador SGS305TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Checking Burner Cap Placement ▯ Check to make sure that there is no gap between the burner cap and burner base. See illustration below for correct and incorrect placements of the burner cap. ▯ You may gently try to move the burner cap from side to side to check if it is properly placed. If properly placed, the cap will click from side to side as the prongs hit the groove ridge. 36" SGSX 36" SGSXP Checking Burner Cap Placement Install Burner Grates Properly position and install each burner grate according to each individual model as shown in the illustrations below. 30" SGS 9 WARNING To prevent flare-ups, properly support pots and avoid spills, all grates must be properly positioned on the cooktop whenever the cooktop is in use. Each of the four feet must be placed into the corresponding dimples in the cooktop. Do not use a grate if the rubber feet are missing or damaged. 30" SGSP For replacement of rubber feet: Call Customer Support at 1-800-735-4328. 12