Thermador T24IR70NSP Design Guide - Freedom Refrigeration - Page 27

FREEDOM® COLLECTION 24-INCH FRESH FOOD COLUMN Model: Framed Column T24BR70FSE INSTALLATION OPTIONS The Freedom® Collection offers you a variety of installation possibilities. In some instances, special accessories are required! INDIvIDUAL COLUMN INSTALLATIONS T24BR70FSE 24-Inch Framed, Right-Hand Door Swing Pre-assembled with Chiseled Stainless Steel Panels and Professional Handle SIDE-By-SIDE INSTALLATIONS When two framed appliances are installed side-by-side, use TE42UKIT10 or TE48UKIT10 to ensure a stable connection. These kits are for 42-inch or 48-inch side-byside combinations and include the side-by-side sealing kit (BSEALKIT10) and a 42-inch or 48-inch top frame part to maintain the framed design. SPECIFICATIONS Total Capacity (cu. ft.) Product Width Product Height Product Depth* Cutout Width Cutout Height Cutout Depth Door Swing Clearance Door Swing Annual Energy Consumption Electrical Supply Power Cord Included Shipping Weight (lbs.) *Depth without door panel 13 23 3/4" 84" 24" 24" 84" 24" Minimum 26 21/32" Reversible 278 kWh 120V/15 Amp Circuit 120V-3 prong 370 ACCESSORIES See pages 232-233 for Freedom Collection accessories. 236 INDIvIDUAL APPLIANCES wITH PARTITION When dimensioning the partition for model 4, note the thickness of the furniture fronts to prevent damage if the doors are opened at the same time. Use the Extreme Combination Side-by-Side Heating Kit (XHEATKIT10) if the gap between the appliance is less than 6" (160 mm) or for permanent connection of two individual appliances, (e.g. freezer or bottom mount appliance next to a freezer). Minimum thickness of the partition 5/8" (16 mm). 1 2 3 4 AT THE END OF A kITCHEN If one side of the appliance is visible, a side panel must be used. The side panel must be connected firmly to the wall, the floor and the overhead furniture/fixtures before the appliance is placed in the cavity. The dimensions of the side panel are taken from the opposite cavity wall. During installation ensure that the cavity is square and the exact size.