Thermador T24IR70NSP Design Guide - Freedom Refrigeration - Page 47

FREEDOM® COLLECTION 18-INCH WINE PRESERVATION COLUMN Model: Flush Column T18IW50NSP INSTALLATION OPTIONS The Freedom® Collection offers you a variety of installation possibilities. In some instances, special accessories are required! INDIVIDUAL COLUMN INSTALLATIONS T18IW50NSP 18-Inch Flush, Reversible Door Swing Build Your Custom Column See pages 230-231 for details. SPECIFICATIONS Bottle Capacity (750 ml) Product Width Product Height Product Depth* Cutout Width Cutout Height Cutout Depth** Door Swing Clearance Specify Door Swing Energy Consumption Electrical Supply Power Cord Included Shipping Weight (lbs.) 70 17 3/4" 84" 24" 18" 84" 24 3/4" 21 21/32" Reversible 365 kWh 120V/15 Amp Circuit 120V-3 prong 314 *Depth without door panel **Cutout depth for flush installation with 3/4" thick panel ACCESSORIES See pages 232-233 for Freedom Collection accessories. All refrigerators are UL and CUL approved. 256 SIDE-By-SIDE INSTALLATIONS When two appliances are installed side-by-side, the Sideby-Side Sealing Kit (BSEALKIT10) must be used to ensure a stable connection. When combining two appliances with a freezing function (e.g. two freezers or one bottom mount appliance and one freezer), use the Extreme Combination Side-by-Side Heating Kit (XHEATKIT10). INDIVIDUAL APPLIANCES WITH PARTITION When dimensioning the partition for model 4, note the thickness of the furniture fronts to prevent damage if the doors are opened at the same time. Use the Extreme Combination Side-by-Side Heating Kit (XHEATKIT10) if the gap between the appliance is less than 6" (160 mm) or for permanent connection of two individual appliances, (e.g. freezer or bottom mount appliance next to a freezer). Minimum thickness of the partition 5/8" (16 mm). 1 2 3 4 AT THE END OF A kITCHEN If one side of the appliance is visible, a side panel must be used. The side panel must be connected firmly to the wall, the floor and the overhead furniture/fixtures before the appliance is placed in the cavity. The dimensions of the side panel are taken from the opposite cavity wall. During installation ensure that the cavity is square and the exact size.