Thermador T36BB820SS Installation Manual - Page 20
Attaching the toe kick panel, Aligning the base panel
View all Thermador T36BB820SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4. Attaching the toe kick panel Note: Risk of damage to the appliance. Do not cover ventilation slots in the base panel. Nominal dimensions to be observed: Wooden panel 1. If required, shorten wooden panel to the required length. 2. Screw wooden panel to the base panel from behind. There are already screw holes in the base panel. 5. Aligning the base panel 1. Put on the base panel (do not screw on) and measure the difference in depth A between the base panel and toe kick panel of the adjacent cabinet. Stainless steel panel (accessory) 1. Attach the base panel to the appliance (do not screw on). 2. Remove the protective film from the adhesive pads. 2. Remove the base panel. 3. Adjust the brackets (a) to the dimensions A and tighten. 3. Fit the toe kick panel to the base panel and press firmly into place. 4. Attach the base panel. 20