Thermador T36BT810NS Installation Manual - Page 22
Attaching stainless steel front, panel to the drawer, Attaching the strips, Adjusting the door
View all Thermador T36BT810NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6. Attaching stainless steel front panel to the drawer 1. Hang stainless steel front panel over the double threaded bolts. 2. Lower door panel and push the fixing brackets down over the bracket screws. 7. Attaching the strips 1. Attach the cover strips (a) & (b) on both vertical sides of the doors and the freezer drawer. 2. Insert the cover plate on the freezer compartment door. 3. When the freezer compartment door is closed, check the depth of the stainless steel front panel with respect to the adjacent furniture front panels. If the depth alignment is correct, tighten the screws on the fixing brackets. 4. Screw nuts onto the threaded bolts on top of the door. Do not tighten yet. 5. Check lateral alignment of the stainless steel front panel. If the lateral alignment is correct, tighten the nuts. 8. Adjusting the door spring Rotate the adjusting screw with a cross-head screwdriver. I = maximum spring tension 0 = no spring tension 22