Thermador T36IB800SP Installation Manual - Page 20
Attaching the adjusting rail to, the door panel, Attaching the fixation strips to the, door panel
View all Thermador T36IB800SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
7. Attaching the adjusting rail to the door panel 1. Measure the distance A between the adjusting rail and the overhead cabinet/fixtures. Notes: Attach the adjusting rail to the door panel with at least 10 screws. One screw should be inserted under each double threaded bolt. The adjusting rail features a variety of holes for the many different design options of door panels. Always screw into the best load-bearing material of the door panel. 8. Attaching the fixation strips to the door panel Note: The fixation strips are pre-assembled for stainless steel doors. In this case continue with the next installation step ("C / 9. Attaching the door panel"). 1. Hang the door panel on the double threaded bolt (a). 2. Align the door panel with the double threaded bolts (Torx screwdriver). Re-examine the dimensions of the gap continuously. Use the height adjustment gauge (b). 2. Loosen the 2 nuts (a) and remove the adjusting rail (b). 3. Mark this amount A on the rear of the door panel. 4. Determine and mark the centerline of the door panel. 5. Put on the adjusting rail and align along the marks. Mark the drill holes. 6. Drill the holes. 7. Screw on the adjusting rail tightly. 3. Transfer the middle drill holes along the outer edge of the appliance door to the door panel and mark. 4. Remove the door panel. 20