Thermador UCVP36XS Product Spec Sheet - Page 6

UCVP36XS 36-INCH DELUXE DOWNDRAFT VENTILATION MASTERPIECE® SERIES REMOTE OR INLINE BLOWER INSTALLATION CONTINUED BLOWER DOWNDRAFT TRANSITIONS CVTSIDE6 6" round transition allows for left, right, or rear venting. Use with inline and remote blowers, and ducting with 6" round duct connections. CVTSIDE8 8" round transition allows for left, right, or rear venting. Use with VTD600P blower as an inline installation, and ducting with 8" round duct connections. CVTSIDE10 10" round transition allows for left, right, or rear venting. Use with inline and remote blowers, and ducting with 10" round duct connections. CVDUCT2 Rectangular 2 ft. long x 1 7/8 in deep x 19 in wide duct. CVDUCT2 transition required to directly connect CVDUCT2 to sides or rear of downdraft housing. Can be used as an extension to exhaust through a cabinet or wall, and can be cut to modify length. For use with installation of inline or remote blower applications with CVTSIDE6, CVTSIDE8, and CVTSIDE10. Page 6 of 13 CVTFRONT6 6" front rough-in plate allows for front venting. Use with inline and remote blowers, and ducting with 6" round duct connections. CVTFRONT8 8" round front plate allows for front downward venting. Use with VTD600P blower as an inline installation, and ducting with 8" round duct connections. CVTFRONT10 10" front rough-in plate allows for front venting. Use with inline and remote blowers, and ducting with 10" round duct connections. CVTRECT2 Transition required to connect CVDUCT2 rectangular duct to downdraft housing at left, right, or rear 3 / 20