Thermador UCVP36XS Product Spec Sheet - Page 9

UCVP36XS 36-INCH DELUXE DOWNDRAFT VENTILATION MASTERPIECE® SERIES (4) BOLTS elected,FLEBXLOIBWLEER BLOWER INSTALLATION - FRONT EXHAUST WITH FLEXIBLE BLOWER BELOW FLOOR LINE EXAMPLE SUPPORT LEGS on g on - R E Q U I R E(2D1604B3mL/8O"mW) E R 11 5/8" 123/4" 103/8" (295 mm) V T D 6 0 0 P - 600 CF M (324 mm) (264 mm) 11 5/8" 600 CFM flexible blower 123/4" (295 mm) can be installed as an (324 mm) 115/8" integrated or inline blower 51/8" (130 mm) 51/8" (295 mm) 11 5/8" (295 mm) (130 mm) 5" 123/4" (127 mm) (321423m/4m" )(1275m" m) (324 mm) 73/8" (187 mm) 51/4" 73/8" (5113/43" m(1m8)7 mm) (133 mm) measurements in inches (mm) measurements in inches (mm) 5. this time. REQUIRED ACCESSORIES B - Installation using inline or remote blowers - with ducting through front panel opening A P P L I C AT I O N - FrontCdAoUwTnIOwNard application with space under floor line for ductwork* - Elbowaloannedfdorucstuwppoorkrt.aIrtemnaoyt binecnluedceedssary to add extra support for CVTFRONT8 8" round front plate allows for front downward venting. Use with VTD600P blower as an inline installation, and ducting with 8" round duct connections. FRONT PANEL 6", 8", OR 10" (152MM, 203MM, OR 254MM) ROUND REMOTE ROUGH-IN PLATE (Purchase Separately) If blower discharge is down, electrical panel must be relocated. 1. Remove hex nuts to remove front panel cover. 2. If blower discharge is down, remove (4) #8-32 hex nuts and 3. Place 6", 8", or 10" (152mm, 203mm, or 254mm) round rough-in plate (purchase separately) over studs around front panel opening. 4. Tighten hex nuts to secure remote discharge plate in place. OPTIONAL ACCESSORIES DOWNDRAFT GAS COOKTOP SEAL TRIM KIT UCV36ST Includes trim, seal, metal grill, and fasteners. Required for installations with 36" gas cooktops. EXTNCE5 This cable extends 5 ft. to move the electrical panel out of the way to offer full installation flexibility in any ducting scenario while installing the downdraft. Ability to connect two cables together to make a 10 ft. cable. *For front downward ducting applications, electrical panel must be remotely mounted. Optional 5' extension cable EXTNCE5 accessory is available to connect remotely placed electrical panel to downdraft. Refer to installation manual. Page 15 Page 9 of 13 3 / 20