Tineco A10 Dash Instruction Manual - Page 12
Maintenance
View all Tineco A10 Dash manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
EN Maintenance Note: • Clean the dustbin and filters periodically. • Use a cleaning tool to thoroughly clean the pre-filter when pink light blinking. To maintain high performance, wash and dry the pre-filter monthly, replacing it every 6 months. Wash and dry the HEPA filter every 3 months, replacing it every 12 months. Mesh filter and Pre-filter 1 2 Mesh filter Pre-filter Turn counter-clockwise to remove the filters. 3 Do not turn the appliance upside down when removing or installing the filter to prevent dust from entering the air channel of the motor. 4 ② Clean the pre-filter and mesh filter under cold, running water. Air dry completely before reinstalling. HEPA Filter ① After cleaning, insert the pre-filter into the mesh filter properly and it clicks into place. Install the clean filters back into the main body, then close the dustbin flap. Press the HEPA release button and gently remove for cleaning. Do not use the appliance without first installing the HEPA filter. Do not place the appliance as above when removing or installing the HEPA filter, to prevent dust from entering the motor. 10