Tineco FLOOR ONE S3 Breeze Instruction Manual - Page 15
Charging Time, Indicator
View all Tineco FLOOR ONE S3 Breeze manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
EN Charging Time • A full charge takes approximately 5 hours. • Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C). Indicator When in Use Battery level ≥ 10%: battery indicator will be illuminated. Battery level < 10%: battery indicator will be blinking. Off: no power detected or possible battery malfunction. Solid red light: dirt sensor malfunction or blocked. Indicator blinking: CWT is empty. Indicator blinking: brush roller is not installed or has a blockage. Illuminated: WiFi has successfully connected. Blinking: WiFi is connecting. 13
EN
13
Charging Time
• A full charge takes approximately 5 hours.
• Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
Battery level ≥ 10%: battery indicator will be illuminated.
Battery level < 10%: battery indicator will be blinking.
Off: no power detected or possible battery malfunction.
Solid red light: dirt sensor malfunction or blocked.
Indicator blinking: CWT is empty.
Indicator blinking: brush roller is not installed or has a blockage.
Illuminated: WiFi has successfully connected.
Blinking: WiFi is connecting.