Tineco FLOOR ONE S3 Breeze Instruction Manual - Page 22

Troubleshooting EN Problem Possible cause Solution The appliance does not turn on Weak suction Brush roller tangled indicator blinking Voice prompt: 1. Please clean the brush roller 2. Please install the brush roller correctly WiFi indicator is off CWT empty indicator blinking Voice prompt: Clean Water Tank empty, please refill water and cleaning solution All lights off in operation Battery level indicator blinking Voice prompt: Low battery, please charge LED loop illuminates red Voice prompt: Please begin selfcleaning cycle Self-cleaning icon blinking Auto protection for overheating Restart after cooling down The appliance has no power The dry filter is not installed, or the dry filter is dirty Suction mouth is blocked Charge the appliance Install the dry filter or clean and allow it to dry completely Pull up the brush roller and remove blockages 1. The brush roller is blocked 2. The brush roller is not installed 1. Remove blockages 2. Install brush roller correctly WiFi is not connected Follow the in-app guide to connect to WiFi CWT is empty Refill CWT Battery overheat or malfunction Cool the appliance down and restart Low battery Charge the appliance, or restart Dirt sensor malfunction or blocked Remove blockages, clean the debris channel, or restart Brush roller is dirty Start self-cleaning Power indicator blinking Motor malfunction Contact Customer Service Note: If the above troubleshooting guide fails to provide a solution, please visit our website www.tineco.com for further support. 20