Tineco FLOOR ONE S5 COMBO Instruction Manual - Page 19

Maintenance

Page 19 highlights

Maintenance Note: • For optimal performance and to prevent odors, always clean and dry DWT, floater, filters, brush roller, brush roller cover completely after each use. • Please make sure each part is installed correctly or the appliance may not work properly. • After maintenance, place the appliance on the charging base vertically. Do not expose the appliance to direct sunlight, and store it indoors in a dry place. Main Body EN To reduce the risk of injury, switch off before performing maintenance. Use a cloth to clean the surface with a neutral detergent. The cloth should be dry to prevent water from entering the appliance. Blinking When the indicator of Dust Sensor Malfunction blinking, remove Dirty Water Tank, clean the dirt sensor with a damp cloth or the cleaning tool. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

EN
17
Maintenance
Note:
• For optimal performance and to prevent odors, always
clean
and
dry
DWT, floater, filters, brush
roller, brush roller cover
completely
after each use.
• Please make sure each part is installed correctly or the appliance may not work properly.
• After maintenance, place the appliance on the charging base vertically. Do not expose the appliance
to direct sunlight, and store it indoors in a dry place.
Main Body
To reduce the risk of injury, switch off before
performing maintenance.
Use a cloth to clean the surface with a neutral
detergent. The cloth should be dry to prevent
water from entering the appliance.
Blinking
When the indicator of Dust Sensor Malfunction
blinking, remove Dirty Water Tank, clean the dirt
sensor with a damp cloth or the cleaning tool.