Tineco PURE ONE S15 Essentials Instruction Manual - Page 14
Troubleshooting, HEPA Filter, Dust Sensor, Brush Head
View all Tineco PURE ONE S15 Essentials manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
EN 3.Clean the dustbin and mesh filter with a damp cloth or the cleaning tool. Air dry completely before reinstalling. Fig.E-3 4.The pre-filter can be washed under cold running water and must be completely dry before reinstalling. Fig.E-4 5.After cleaning, insert the pre-filter into the mesh filter properly and it clicks into place. Install the clean filters back into the main body, then close the dustbin flap. Fig.E-5 Warning: • The power brush contains electrical components which must not be soaked or washed with water. • Turn the power off and remove the battery before performing maintenance for the brush roller. • To reduce the injury, do not touch the brush roller while the appliance is in working condition. TROUBLESHOOTING HEPA Filter 1.Pull out the HEPA filter (in magnetic design) for cleaning. Do not use the appliance without first installing the HEPA filter. Fig.E-6 2.The HEPA filter can be washed under cold running water and must be completely dry before reinstalling. Fig.E-7 Dust Sensor • To avoid dust accumulation which can affect cleaning performance, wipe the suction mouth with a damp cloth. Fig.E-8 Brush Head 1.Slide the switch to open the brush roller end cover, and rotate it clockwise to be able to pull out the brush roller. Fig.E-9 2.After removing the brush roller, gently clean the brush window, suction mouth and the row of plastic teeth. Fig.E-10 3.Fully reinsert the brush roller into the brush window and the end cover can be rotated counter-clockwise until it clicks securely back into place. Fig.E-11 Problem Solution Charge the battery The appliance does not turn on Restart after cooling down Check and remove blockages Clean the dustbin and filters Weak suction power Install the pre-filter Remove blockages Clean the brush roller Abnormal sounds or plastic teeth tangled in brush Pull out the brush roller and remove blockages Remove the mesh Suction mouth blocked filter, clean the suction mouth and dustbin Reinsert the adaptor correctly Battery won't charge Check the main body and battery are correctly placed Use the original adaptor Brush roller tangled indicator blinking Remove blockages 12