Toro 51346 Operation Manual - Page 4
Starting the Trimmer, Stopping the Trimmer, Trimming, Edging, Lengthening the Line - spool
UPC - 021038513461
View all Toro 51346 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Starting the Trimmer To start the trimmer, squeeze the trigger. m-6412 Stopping the Trimmer To stop the trimmer, release the trigger. Trimming 4 Lengthening the Line To increase the length of the cutting line, tap the spool on the ground while the trimmer is running. Note: The blade under the guard will cut the line to the correct length. Important: Use the following precautions to ensure optimal line performance. • Do not hold the spool on the ground. • To help prevent line tangle, tap only once to lengthen line. If additional line is required, wait a few seconds before tapping the trimmer head. • If the line is not advanced occasionally, it will wear down to the eyelet. When the trimmer stops, the short line may retract into the cutter head. Should this occur, remove spool, refeed the line through eyelet, and assemble spool to trimmer. m-6316 Edging m-6325 3352-878