Toshiba 20HLV16 Owners Manual - Page 19

Introduction Connecting your TV/DVD Connecting an amplifier equipped with an MPEG audio decoder MPEG2 sound You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. TV/DVD back panel To COAXIAL DIGITAL AUDIO OUT Amplifier equipped with an MPEG2 audio decoder You will need: • one coaxial cable Notes: • Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor. • Refer to the owner's manual of the connected equipment as well. • The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the TV/DVD's power cord. If you leave the amplifier power on, the speakers may be damaged. To COAXIAL type digital audio input Setting up your TV/DVD Using the TV/DVD's Features DVD Playback Connecting an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers). TV/DVD back panel To COAXIAL DIGITAL AUDIO OUT Amplifier equipped with a Digital audio input To COAXIAL type digital audio input You will need: • one coaxial cable Notes: • PCM audio is limited to DVD or CD playback. • Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor. • Refer to the owner's manual of the connected equipment as well. • The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier's before you connect or disconnect the TV/DVD's power cord. If you leave the amplifier power on, the speakers may be damaged. 5X20601A(E)P11-21 19 19 17/3/06, 12:23 PM Appendix