Toshiba 27HL85 User Manual - Page 11

Connecting your TV Using the remote control E Connecting a DVD player or satellite receiver F and a VCR S Introduction This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel. You will need: • two (or three, if satellite receiver is used) coaxial cables • one set of standard A/V cables (between the TV and VCR) • one S-video cable (between the TV and DVD player/satellite receiver) • one pair of standard audio cables (between the TV and DVD player/satellite receiver) Note: For the highest possible picture quality from a DVD player or satellite receiver without component video, HDMI, or DVI, use an Svideo cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI or DVI, see page 15.) Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the TV. (See the illustration, which shows the DVD player/satellite receiver connected to VIDEO 1 on the TV upper back panel, and the VCR connected to VIDEO 2 on the TV side panel.) From Antenna IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN Stereo VCR OUT TV upper back panel TV side panel (VIDEO-2 IN) The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. TV lower back panel S-VIDEO VIDEO OUT OUT IN from ANT From Satellite S-VIDEO VIDEO OUT OUT Dish Satellite Receiver AUDIO OUT L R DVD Player AUDIO OUT L R Setting up your TV Using the TV's Features Appendix Index 11