Toshiba 32A12A Owners Manual - Page 17
Channel, Numbers, Channel Numbers
View all Toshiba 32A12A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Introduction Connecting your TV Using the Remote Control Setting up your TV 3. Press y or z to highlight TV/CABLE. 4. Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable). 5. Press z to highlight CH PROGRAM. SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: [ADD] ERASE V-CHIP CONTROL MORE MOVE [ ] SELECT [ ] SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: [ADD] ERASE V-CHIP CONTROL MORE MOVE [ ] SELECT [ ] 6. Press x or • to start automatic channel programming ("CH PROGRAM" displays on-screen). The TV automatically cycles through every TV or cable channel (depending on which you selected), and stores all active channels in the TV's memory. 7. When automatic channel programming is complete, the message "CH Programming Completed" appears. 8. Press CHANNEL ▲▼ to view the programmed channels. Adding and erasing channels manually After you have automatically programmed the channels into the TV's memory, you can manually add and erase individual channels. To add a channel to or erase a channel from the TV's memory: 1. Tune the TV to the channel you want to add or erase. If you are adding a channel, you will need to use the CHANNEL NUMBERS to select the channel. 2. Press MENU. 3. Press x or • to highlight the SET UP menu. 4. Press y or z to highlight ADD/ERASE. RECALL MUTE o POWER 1 23 4 56 7 89 CH RTN 100 0 ENT CH VOL MENU/ VOL ENTER TV CABLE VCR CH EXIT CHANNEL NUMBERS MENU yz x • CHANNEL yz EXIT SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: [ADD] ERASE V-CHIP CONTROL MORE MOVE [ ] SELECT [ ] 5. Press x or • to highlight ADD or ERASE, whichever function you want to perform. 6. Press MENU. 7. Repeat steps 1-6 for other channels you want to add or erase, or press EXIT to return to normal TV viewing. Changing channels To change to the next programmed channel: Press CHANNEL yz. To change to a specific channel (programmed or unprogrammed): Press the CHANNEL NUMBERS (0-9 and 100). Note: For channels 100 and higher, press the 100 button, and then the next two channel numbers (for example, to select channel 100, press 100, 0, 0; to select channel 125, press 100, 2, 5). 17 Using the TV's Features Appendix Downloaded from www.Manualslib.com manuals search engine