Toshiba 32A40 Owners Manual - Page 26

Set up Preparation Basic Operation Programming Your Favorite Channels The Favorite Channel Programming feature allows you to program up to 12 of your favorite channels. Once programmed, you can use the FAV CH t/s buttons on the Remote Control to scan through only your favorite channels, skipping other channels you do not normally view. You can use the CHANNEL s/t buttons to scan through all the channels you have programmed into the TV's memory. MENU TV/VIDEO VOLUME CHANNEL T St s POWER Programming your favorite channels 1 Select a channel you want to program. (You must be on the channel you want to set or clear.) Example: channel 2 MENU T/S t/s 2 RECALL MUTE o POWER 1 23 4 5 6 7 89 CH RTN 100 0 ENT T/ S MENU CH VOL MENU/ VOL ENTER TV CABLE VCR CH EXIT FAV CH TV/VIDEO A REC TV/VCR STOP PLAY SLOW PAUSE REW FF 2 Press MENU until the Setup menu is displayed on the screen. 3 Press s or t until "FAVORITE CH" is displayed in purple. TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] START[T S] 4 Press T or S to display the FAVORITE CH program menu. Each time you press T or S, you are guided between "SET" and "CLEAR". FAVORITE CH [SET]CLEAR 0 0 0 0 0 0 0 0 0 0 0 0 [TV:CYAN,CABLE:BLUE] SELECT[T S] SET[t s] s/t 5 To program channels: Select "SET". Then press s or t until the channel number to be programmed ("2" in this example) replaces "0" on the display. FAV CH t/s To erase channels: Select "CLEAR". Then press s or t until "0" replaces the channel number to be erased, "2" for example. 6 Repeat steps 1 to 5 for other channels. FAVORITE CH SET[CLEAR] 2 0 0 0 0 0 0 0 0 0 0 0 [TV:CYAN,CABLE:BLUE] SELECT[T S] CLEAR[t s] Selecting your favorite channels To select the favorite channels you have programmed, use the FAV CH t/s buttons on the Remote Control instead of using the CHANNEL s/t buttons. Note: The FAV CH t/s buttons cannot function if you have not programmed your favorite channels. Advanced Operaion Reference Section 26