Toshiba 32A62 Owners Manual - Page 29

Welcome to Toshiba Connecting your TV Using the Remote Control Changing the location of the PIP window With the TV in PIP mode, press LOCATE to change the location of the PIP window on-screen. Every time you press LOCATE, the PIP window changes position counter-clockwise. Freezing the PIP display With the TV in PIP mode, press STILL to freeze the PIP display. The PIP picture becomes still, and is outlined in red on-screen. Press STILL again to restore the moving picture (outlined in green). ADV/ C.CAPT PIP CH MENU FAV ENTER FAV RESET ADV/ EXIT PIP CH STOP SOURCE PLAY PIP REC TV/VCR REW FF STILL LOCATE SWAP CT-9946 PIP CH SOURCE PIP SWAP LOCATE STILL Still Watching multi-window PIP The multi-window PIP features displays the channels you programmed into the TV's memory (page 17) in six small boxes across the bottom of the screen. Note: The LOCATE, SWAP, PIP CH yz, SOURCE, and STILL buttons do not function in multi-window PIP mode. To view multi-window PIP: Press PIP three times. The TV cycles through all of the programmed channels, showing a few seconds of each channel's programming, and then freezes the image and moves on to the next channel in a continuous cycle. The channel number appears above each PIP window. Note: The multi-window PIP feature displays channels you programmed for the signal source you are currently viewing (TV or Cable). 14 23 27 30 43 56 X A Note: If V-Chip blocking is enabled when you view multi-window PIP, channels exceeding the rating limits will appear as a black window with an "X." To turn off multi-window PIP: Press PIP again, or change the channel. Setting up your TV Using the TV's Features Appendix Reference 29