Toshiba 32HL84 Owner's Manual - English - Page 14

Connecting your TV Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record one channel while watching another channel. You will need: • two coaxial cables • two sets of standard A/V cables VCR1 From Antenna IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO LR IN OUT TV Note: If you have VCRs with S-video, use S-video cables instead of standard video cables. Do not connect both a standard video cable and an S-video cable to VIDEO 1 (or VIDEO 2) at the same time, or the picture performance will be unacceptable. Do not connect the same VCR to the output and input terminals on the TV at the same time. To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO 1. * The Video OUT terminals does not output the POP picture. **The Audio OUT terminals can output the sound of either the Main or POP picture (see "Selecting the Audio OUT sound" on page 58). The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. VCR2 CH 3 CH 4 * ** VIDEO AUDIO L R IN OUT Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. You will need: • one set of standard A/V cables Note: If you have a camcorder with S-video, use an S-video cable instead of a standard video cable. Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable. Camcorder VIDEO AUDIO OUT L R Video-3 (Side panel) 14