Toshiba 36AX61 Owners Manual - Page 17

Verifying the device code (990) Use this feature to verify the codes for your other devices. The number of blinks after pressing the 1, 2, 3, and 4 buttons is the 4-digit code set up for that mode. For example, to verify the VCR device code: 1. Press MODE to select the VCR mode. 2. While holding down RECALL, press 9, 9, 0 in sequence. 3. Press 1 ➝ 0 blinks. 4. Press 2 ➝ 3 blinks. 5. Press 3 ➝ 8 blinks. 6. Press 4 ➝ 5 blinks. This verifies that the device code of the VCR is "0385." Using the Volume Lock feature (993) For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls (VOL yz and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIO1/2 modes. For example, to lock the volume controls to the CABLE/SAT mode: 1. Press MODE to select the CABLE/SAT mode. 2. While holding down RECALL, press 9, 9, 3 in sequence. 3. Press VOL y. The Mode indicator will blink two times (locked). The following table describes the Volume Lock implementation. Volume Locked to: TV CBL/SAT VCR DVD AUD1 AUD2 TV (default) TV TV TV TV AUD1 AUD2 CBL/SAT CBL/SAT CBL/SAT CBL/SAT CBL/SAT AUD1 AUD2 VCR VCR VCR VCR VCR AUD1 AUD2 DVD DVD DVD DVD DVD AUD1 AUD2 AUD1 AUD1 AUD1 AUD1 AUD1 AUD1 AUD1 AUD2 AUD2 AUD2 AUD2 AUD2 AUD2 AUD2 To reset the volume controls to the original device code: 1. While holding down RECALL, press 9, 9, 3 in sequence. 2. Press VOL z. The mode indicator will blink four times (unlocked). Operational feature Reset (980) This feature clears all setup features not related to "Device code set up" and resets the Volume Lock to "TV." To reset the features: While holding down RECALL, press 9, 8, 0 in sequence. The mode indicator will blink two times, and then pause and blink two more times. 17 CHANNEL NUMBERS MODE VOL y z RECALL Index Reference Appendix Using the TV's Features Setting up your TV Using the Remote Control Connecting your TV Welcome to Toshiba