Toshiba 36AX61 Owners Manual - Page 24
Input, Tv/video, Channel, Channel Numbers
View all Toshiba 36AX61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Selecting the signal source Use the INPUT button on the remote control (or the TV/VIDEO button on the TV) to monitor or change the signal source connected to your TV. To monitor the signal source: TV/VIDEO CHANNEL y z MENU TV / VIDEO VOLUME CHANNEL POWER Press INPUT (or TV/VIDEO) once. The current signal source displays in green. To change the signal source: Repeatedly press INPUT (or TV/VIDEO). The selected signal source displays in green. MENU yzx • TV VIDEO 1 VIDEO 2 VIDEO 3 ColorStream VIDEO 1 VIDEO 2 VIDEO 3 ColorStream ANT 1 ANT 2 Pressing INPUT on the remote control Pressing TV/VIDEO on the TV Adding channels to the TV's memory When you press CHANNEL ▲/▼ on the TV or remote control, the TV stops only on the channels stored in the TV's memory. Note: To tune the TV to a channel not programmed in the TV's memory, use the CHANNEL NUMBERS on the remote control. Follow the steps below and on the next page to program channels into the TV's memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them in the TV's memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 25). If you use both ANT-1 and ANT-2 terminals, you will need to program channels for each input source. To program channels automatically: 1. Press MENU. 2. Press x or • to highlight the SET UP menu. 3. Press y or z to highlight TV/CABLE. 4. Press x or • to highlight TV (if you use an antenna) or CABLE (if you use cable). 5. Press z to highlight CH PROGRAM. CHANNEL NUMBERS MENU yzx • CHANNEL y /z EXIT INPUT Setting up your TV SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL ANT1/2: [ANT1] ANT2 TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: [ADD] ERASE MORE MOVE [ ] SELECT [ ] SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL ANT1/2: [ANT1] ANT2 TV/CABLE: [TV] CABLE CH PROGRAM ADD/ERASE: MORE [ADD] ERASE MOVE [ ] SELECT [ ] 6. Press x or • to start automatic channel programming ("CH PROGRAM" displays on-screen). The TV automatically cycles through every TV or cable channel (depending on which you selected), and stores all active channels in the TV's memory. 7. When automatic channel programming is complete, the message "CH Programming Completed" appears. 8. Press CHANNEL ▲/▼ to view the programmed channels. 24