Toshiba 37AV600E Owners Manual - Page 18
Selecting the picture mode, Adjusting the basic picture quality, Activating the black/white level,
UPC - 622652503311
View all Toshiba 37AV600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using the TV's features Selecting the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. • Press q to select the desired picture quality. Dynamic Mode Picture quality q Dynamic bright and dynamic picture q Standard standard picture q Mild soft picture q Memory the picture quality you set Note: In the PC input mode (- page 23), this mode is not available. Adjusting the basic picture quality 1 Press MENU, then press I or i to display the PICTURE menu. Selection I Pressing i Back light darker brighter Contrast lower higher Brightness darker brighter Colour paler deeper Tint reddish greenish Sharpness softer sharper Notes: In the PC input mode (- page 30), Colour, Tint and Sharpness modes are not available. Activating the black/white level This function increases the strength of dark areas of the picture which improves definition. 1 From the Picture settings menu, press u or U to select Black/White Level. 2 Press I or i to select On or Off. Black/White Level On Note: In the PC input mode (- page 30), this mode is not available. PICTURE Picture settings 3D Colour management Base colour adjustment Colour Temperature ActiveBacklightControl Cinema Mode OK Off Cool On On MENU Back EXIT Watch TV 2 Press u or U to select the Picture settings menu, then press Q. Picture settings 1/2 Back light 100 Contrast 100 Brightness 50 Colour 50 Tint 0 Sharpness 0 Black/White Level On MENU Back EXIT Watch TV 3 Press u or U to select an item you want to adjust, then press I or i to adjust the settings as required. Contrast 100 Activating the MPEG NR (Noise Reduction) If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function. 1 From the Picture settings menu, press u or U to select MPEG NR on the 2nd page. Picture settings 2/2 MPEG NR DNR Middle Middle MENU Back EXIT Watch TV 2 Press I or i to select Off, Low, Middle or High. MPEG NR Middle Note: In the PC input mode (- page 30), this mode is not available. 18