Toshiba 55UX600U User Manual - Page 66
Easy Setup using PIN Personal Identification, Number, Assisted Setup, Manual Setup
View all Toshiba 55UX600U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Chapter 8: Advanced features To cancel searching for the AP: Press RETURN while searching for the AP. A message will appear. Then press C or c to select Yes and press . OK Easy Setup using PIN (Personal Identification Number) 1 From the PREFERENCES menu, highlight Network Setup and press . OK 2 Press B or b to highlight Wireless Setup, and press . OK 3 Press B or b to highlight Easy Setup, and press . OK 4 Press C or c to select PIN. 5 Press b to highlight Start Scan, and press . OK 6 Press B or b to select the desired AP and press . OK Note: Check the MAC address on label of the AP or the manual of it and select an AP. 7 When the PIN code window appears, enter the displayed PIN into your AP, and then press OK to start the PIN Setup. When a message displays to report that the setup was successful, press . OK To cancel searching for the AP: Press ROETUKRN while searching for the AP. A message will appear. Then press C or c to select Yes and press . OK Assisted Setup 1 From the PREFERENCES menu, highlight Network Setup and press . OK 2 Press B or b to highlight Wireless Setup, and press . OK 3 Press B or b to highlight Assisted Setup, and press . OK 4 Press B or b to select the desired AP and press . OK Note: Check the MAC address on label of the AP or the manual of it and select an AP. 5 Highlight Security Key and press OK . The Software Keyboard window will appear. 6 Input the Security Key by using the Software Keyboard (- page 69). To save your setting, press the BLUE button. Note: • The Security Key must adhere to these conditions: -TKIP/AES: 8-63 ASCII or 64 Hex characters -WEP: 5 or 13 ASCII or 10 or 26 Hex characters • Key ID of WEP encryption to set is only one. 7 Highlight Done, and then press . OK Note: If Network Name is not displayed, see step 4 and 5 in Manual Setup (- the next column) to set Network Name before pressing Done. Note: Settings are not saved if RETURN is pressed before Done is selected. Manual Setup 1 From the PREFERENCES menu, highlight Network Setup and press . OK 2 Press B or b to highlight Wireless Setup, and press . OK 3 Press B or b to highlight Manual Setup, and press . OK 4 Press B or b to highlight Network Name, and press OK . The Software Keyboard window will appear. 5 Input the Network Name by using the Software Keyboard (- page 69). To save your setting, press the BLUE button. 6 Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. 7 Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES. Note: • Certain encryption types are only compatible with specific authentication types. -When Authentication is Open System, only WEP or None is compatible. -When Authentication is Shared Key, only WEP is compatible. -When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES is compatible. • When incompatible Authentication/Encryption pairings are attempted, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved. • Key ID of WEP encryption to set is only one. 8 Press B or b to highlight Security Key, and press OK . The Software Keyboard window will appear. 9 Input the Security Key by using the Software Keyboard (- page 69). To save your setting, press the BLUE button. Note: This item is grayed out when Encryption is None. 10 Highlight Done, and then press . OK Note: When Encryption is None, a message will appear. Press C or c to select Yes and press . OK Note: Settings are not saved if RETURN is pressed before Done is selected. 66