Toshiba 61H71 Owners Manual - Page 19

Introduction Connecting your TV Using the Remote Control Adding channels to the TV's memory When you press Channel yz, the TV will select only the channels stored in the TV's channel memory. Follow the steps below and on the next page to program all active channels into the TV's memory. Programming channels automatically The TV can automatically detect all active channels in your area and store them in its memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 20). To program channels automatically: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z until TV/CABLE is highlighted. 3. Press x or • to highlight either TV or CABLE, depending on which you use. If you use an antenna, highlight TV; if you use cable, highlight CABLE. SET UP LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE ENGL I SH 00:00 ANT1 TV / CABLE ADD 4. Press z to select CH PROGRAM. Note: To tune the TV to a channel not programmed in the channel memory, use the Channel Number buttons on the remote control. LIGHT RECALL POWER TV CABLE VCR MUTE TV/VIDEO TIMER 123 CH 456 789 CH RTN VOL 100 0 ENT ADV/ PIP CH PIC SIZE FAV MENU/ ENTER FAV Channel yz Channel Number MENU yzx • FAVORITE EXIT STROBE ADV/ PIP CH SET UP LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE ENGL I SH 00:00 ANT1 CABLE ADD 5. Press x or • to start automatic channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "Programming Now-Please Wait" appears. 6. When channel programming is complete, the message "Completed" appears. 7. Press Channel yz to view the programmed channels. Setting up your TV Using the TV's Features Appendix Index 19