Toshiba 65NH84 Owners Manual - Page 29

Introduction Adjusting the color convergence This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture only when the three images converge correctly. Convergence may drift over time or if you move the TV. If you can see clear images on your TV screen, skip this procedure. It is recommended that the adjustment is made only after the TV has been on for at least 30 minutes. Automatically adjusting the color convergence using TouchFocus™ Press the TouchFocus button on the TV front panel once. The TV will enter auto-convergence mode, and adjust convergence automatically. TV front panel Connecting your TV Using the Remote Control Setting up your TV Using the TV's Features MENU VOLUME CHANNEL EXIT TV/VIDEO Touch Focus TOUCH FOCUS MENU x •zy TouchFocus™ When the adjustment is complete, the normal picture appears. For more detailed convergence adjustment, you can adjust the convergence manually, as described below. Manually adjusting the color convergence You can use the CONVERGENCE function in the PICTURE menu to perform auto-convergence (TouchFocus) and manual convergence adjustments. 1. Press MENU, and then press x or • until the PICTURE menu appears. 2. Press y or z to highlight CONVERGENCE, and then press ENTER to display the pull-down menu. 3. Press y or z to highlight ADJUST, and then press ENTER. The TV will enter auto-convergence mode. When the adjustment is complete, the TV will enter 56-point convergence mode. cursor P I CTURE MODE P I CTURE SETT I NGS D I SPLAY FORMAT C I NEMA MODE CONVERGENCE ADJUST RESET RESET SAVE : SELECT ENTER : START : TO SELECT POS I T I ON ENTER : TO ADJUST CONVERGENCE EX I T : TO F I N I SH ADJUSTMENT If you see separate red or blue crossed lines (or red or blue shadows next to white lines), you need to adjust the convergence. 4. Press yzx • to move the cursor to the position you want to adjust. 5. Press ENTER repeatedly to select RED or BLUE adjusting mode (red crossed lines or blue crossed lines), depending on which color needs adjusting. (continued on next page) TV CABLE/SAT POWER LIGHT SLEEP VCR DVD AUDIO1 123 AUDIO2 MODE 456 789 S PIC SIZE ACTION MENU GUIDE ETUP +10 100/ 0 ENT INFO FAVORITE TLHINEKATER TITLE SUB TITLE FAV AUDI O ENTER FAV CH VOL EXIT DVD RTN DVD CLEAR CH RTN INPUT RECALL MUTE SLOW/DIR SKIP/SEARCH MENU ENTER yzx • 29 Downloaded from www.Manualslib.com manuals search engine Appendix Index