Toshiba 72MX196 Operating Guide - Page 57

MX196_EN.book Page 57 Tuesday, June 27, 2006 1:43 PM Chapter 6: Using the TV's advanced features Selecting the lamp mode You can select either the High Bright or Low Power lamp mode. The High Bright mode is useful when additional picture brightness is desired (such as in a bright room). To select the lamp mode: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 In the Lamp Mode field, select either High Bright or Low Power. Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Vertical Edge Enhancer Color Management GCaomloer Maondeagement Reset High Auto Low Cool Low Power Middle ANT 1 Off Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: If you set the lamp mode to Low Power, each time you turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode after a short period of time. You may notice a change in screen brightness when this happens. This is normal and is not a sign of malfunction. Using the Vertical Edge Enhancer feature The Vertical Edge Enhancer feature strengthens video contour. To turn on the Vertical Edge Enhancer feature: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 In the Vertical Edge Enhancer field, select the mode you prefer (Off, Low, Middle, or High). Advanced Picture Settings Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Lamp Mode Vertical Edge Enhancer Color Management Game Mode Reset High Auto Low Cool Low Power Middle ANT 1 On Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: • Changing the setting of this item will cause the Mode to automatically change to Preference. • When the input is changed to PC, this feature is automatically set to High and grayed out in the menu. 57 MX196 (E/F) Web 213:276