Toshiba A8 PTA83C-KFT01F Users Manual Canada; English - Page 155
Configuring the Execute-Disable Bit Capability and TPM, Starting and Ending the BIOS Setup Program
View all Toshiba A8 PTA83C-KFT01F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
HW Setup Configuring the Execute-Disable Bit Capability and TPM The configurations for the Execute-Disable Bit Capability and TPM are carried out in the BIOS setup program. Notes before using the BIOS Setup ■ In most cases, changes to the system's configuration should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows Device Manager and so forth. If you make changes to the configuration through the BIOS setup program, please be aware that the configuration set through the Windows applications will take priority. ■ Changes to the settings within the BIOS setup program will not be erased even if the power supply is switched off and the main battery removed. However, if the built-in Real Time Clock (RTC) battery runs out of power, most of the settings will revert back to their default values. However, please note that the following items will not be affected in this instance: • Password • Hard Disk Drive Password • Security controller Starting and Ending the BIOS Setup Program Starting the BIOS Setup Program 1. Switch on your computer while pressing the Esc key. If "Password =" is displayed, enter either the Supervisor Password, if one is set, or the User Password and press the Enter key. Please refer to Chapter 6, the TOSHIBA Password Utility, for details about the User Password. The "Check system. Then press [F1] key." message is displayed. 2. Press the F1 key. The BIOS setup program will start up. Select either the Execute-Disable Bit Capability or settings in the security controller to make changes. Please refer to the operating instructions displayed in the settings screen. User's Manual 7-9