Toshiba A8 PTA83C-KFT01F Users Manual Canada; English - Page 224
Dial tone detect, Zn Recall stored profile, &Cn Data Carrier Detect (DCD) control, NODIALTONE, BUSY
View all Toshiba A8 PTA83C-KFT01F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
AT Commands X4 (default) Enable X5 Enable Enable Enable OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , RRING, NO BONGTONE, DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED Dial tone detect Disabled: The modem dials a call regardless of whether it detects a dial tone. Enabled: The modem dials only upon detection of a dial tone, and disconnects the call if the dial tone is not detected within 10 seconds. Busy tone detect Disabled: The modem ignores any busy tones it receives. Enabled: The modem monitors for busy tones. Result Codes: OK n=0,1,2,3,4,5 ERROR Otherwise Zn Recall stored profile The modem performs a soft reset and restores (recalls) the configuration profile according to the parameter supplied. If no parameter is specified, zero is assumed. Either Z0 or Z1 restores the profile. Result Codes: OK n=0,1 ERROR Otherwise &Cn Data Carrier Detect (DCD) control Data Carrier Detect is a signal from the modem to the computer indicating that a carrier signal is being received from a remote modem. DCD normally turns off when the modem no longer detects the carrier signal. &C0 The state of the carrier from the remote modem is ignored. DCD circuit is always on. &C1 DCD turns on when the remote modem's carrier signal is detected, and off when the carrier signal is not detected (default). C-6 User's Manual