Toshiba BDX4300 Owners Manual - Page 17
Upgrade], USB Storage, Internet, SW upgrade by Internet introduction - firmware update
View all Toshiba BDX4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Press / to select an option. Press OK. Select "Yes" or "No" using /. Resolution 14s has been changed! Does everything looks all right with this resolution? Press Yes if you want to apply it. Press No to rollback to previous one. Yes No Previous OK Next 7. Press OK, enter Aspect ratio setting. Choose an aspect ratio that fits your TV. The change will be applied in the next page. Determine whether to save the setting or rollback to the previous aspect ratio. 16:9 Full 16:9 Normal 4:3 Pan&Scan 4:3 Letterbox Previous OK Next Press / to select an option. Press OK. Setting wizard is complete! Now press the OK button to finish and return to the Setup Menu. Previous OK Finish 8. Press OK to return to [General Setting] Menu. • [Upgrade] For software upgrades to enhance performance, you could select the following upgrade method and start to upgrade. {Disc}/{USB Storage}/{Internet} SW upgrade by Disc/USB Storage Upgrade the software from the disc or USB flash drive. 1. Insert the disc or connect the USB flash drive which contains the upgrade file package. 2. Follow the instruction on the TV screen to confirm upgrade operation. - The system will reboot after 5 seconds or OK key is pressed. Notes: - If set [Disc Auto Playback] to [Off], after you insert the disc that contains the upgraded information to upgrade system, you have to start upgrade from this option of SETUP Menu. - If the upgrade file package did not pass the verification, error prompt is displayed , check the package again (such as the package is not complete). - Make sure the firmware version is not an old version. Downloaded from www.Manualslib.com manuals search engine - When you upgrade the system using USB flash drive, you should make a new folder named UPG_ALL, and copy the upgrade file into this folder. SW upgrade by Internet introduction There are two modes to upgrade via internet: Automatic Mode and Interactive Mode. Automatic Mode: The player will check the Internet whether it is connected automatically when powered on. If connected, player will try to connect the Toshiba server to check if there is new firmware for the player. If yes, the player will pop up a message on the screen to inform you that an upgrading firmware is available on the internet. You can choose whether to upgrade or not. Upgrade New software found! Upgrade? Cancel OK Start Interactive Mode: You can also do Internet upgrade via setup menu. You should make sure that the player is connected to the internet first. Press SETUP button of the remote control, then choose "System -> Upgrade -> Internet" and press OK button. Then the player will connect the Toshiba server to check if there is new firmware for the player. Upgrade Connecting to the server. Please wait! If yes, the player will pop up a message on the screen and you can choose whether to upgrade or not. Upgrade New software found! Upgrade? Cancel OK Start If no, the player will pop up a message on the screen to inform you that there is no new firmware for the player. Upgrade Current version is latest. Update is not available. Cancel 17 English