Toshiba BW10 - Y User Guide - Page 28
Inserting and removing a media card, An SD™ Card must be purchased separately.
View all Toshiba BW10 - Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 Getting Started Inserting and removing a media card NOTE An SD™ Card must be purchased separately. To install a media card: 1 While pressing down on the slot cover release latch, slide the slot cover out and open. 2 Insert a memory card into the slot until it locks into place as shown below. (Sample Illustration) Inserting the media card 3 To remove an installed media card, gently press the card inward to release it. The card pops out slightly. 4 Pull the card straight out. (Sample Illustration) Removing the media card 5 Close the battery/media card slot cover. Secure the cover by sliding it back into place.
28
Getting Started
Inserting and removing a media card
An SD™ Card must be purchased separately.
To install a media card:
1
While pressing down on the slot cover release latch, slide the
slot cover out and open.
2
Insert a memory card into the slot until it locks into place as
shown below.
(Sample Illustration) Inserting the media card
3
To remove an installed media card, gently press the card
inward to release it.
The card pops out slightly.
4
Pull the card straight out.
(Sample Illustration) Removing the media card
5
Close the battery/media card slot cover. Secure the cover by
sliding it back into place.
NOTE