Toshiba BW20 User Guide - Page 18
Remove moisture from all camcorder surfaces, Close the slot cover and port cover securely.
View all Toshiba BW20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 Getting Started Remove moisture from all camcorder surfaces NOTE The recommended capacity of an (optional) Micro SD™ Card is 1 GB or greater. To prevent data corruption, format the Micro SD™ Card in the camcorder before using. All data will be erased when the Micro SD™ Card is formatted. Make sure that all data is copied to your computer or other media before formatting the Micro SD™ Card. NOTE When a Micro SD™ Card is inserted, photos and videos are saved onto the Micro SD™ Card rather than in the built-in memory. Close the slot cover and port cover securely. If any cover is not closed or is not closed completely, the camcorder will no longer be waterproof. When closing a cover, make sure that no foreign object such as sand, hair, dust, etc. is caught in the rubber seal. Remove moisture from all camcorder surfaces Moisture may get inside the camcorder while opening a cover if moisture adhering to the crevices in the slot cover and port cover is not properly wiped off. To completely remove all moisture, follow the steps below: 1 Gently shake the camcorder to shake off excess water drops. 2 Wipe off any moisture from the area around the cover with a soft cloth. ❖ Make sure that water does not get inside the camcorder when opening the cover.