Toshiba DR570 Owner's Manual - English - Page 50

TIMER RECORDING 4 Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B]. Date JAN/02 CH DTV125- 1 Start 1 : 00AM Mode SP End - - : - - SP 2 : 00 • You cannot make a program which recording time exceeds 12 hours. 5 Use [K / L] to select analog digital ("DTV") mode or external input (L1(Rear) / L2 (Front)), then press [B]. Date JAN/02 CH L1 Start 1 : 00AM Mode SP End 2 : 00AM SP 1 : 00 Auto recording mode select... When "Auto" is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. Date JAN/02 CH DTV125- 1 Start 1 : 00AM Mode Auto End 2 : 00AM Auto 1 : 00 • "Auto" is only available for one program in the timer program list. • The recording may be cut short, when the available recording space of the disc is too limited. 7 Press [ENTER] when all items are entered. After displaying an instructive message for 10 seconds, timer program list will appear. To record from external input (e.g., cable/ satellite box), select L1(Rear) or L2 (Front). Use [K / L] to select the channel number to record. For digital mode, select both major and minor channels. Refer to "How to select a channel number for the timer recording" on page 51 for more details. e.g.) analog mode Date JAN/02 CH 10 Start 1 : 00AM Mode SP End 2 : 00AM SP 1 : 00 e.g.) digital mode Date JAN/02 CH DTV125- 1 Start 1 : 00AM Mode SP End 2 : 00AM SP 1 : 00 6 Use [K / L] to select a recording mode. Press ON / STANDBY to Timer Standby mode. Timer Programming JAN/ 2/09 1:00 AM 125- 1 SP SP (1:00) THU JAN/01 10:00AM Date Start End CH JAN/02 1:00AM 2:00AM DTV125- 1 Your program setting will be stored. • To set another program, repeat steps 2 to 7. • To exit, press [TIMER PROG.] or [SETUP]. • When 2 or more programs are overlapped, "Timer program overlapped" appears, and the overlapped program will be displayed in blue. To correct the timer program refer to "Checking, canceling, or correcting the timer programming information" on page 52. 8 Press [I/y ON/STANDBY] to set a timer programming. will appear on the front panel display, while this unit waits to make the recording. Date JAN/02 CH DTV125- 1 Start 1 : 00AM Mode SP End 2 : 00AM SP 1 : 00 Refer to "Recording Mode" on page 44. • You can check the remaining recordable space of the disc when you select the recording mode. Date JAN/02 CH DTV125- 1 Start 1 : 00AM Mode SP End 2 : 00AM SP 1 : 00 50 EN &4$6%@%3,6@&/@WJOEE