Toshiba DVR670 Owner's Manual - English - Page 19

Introduction Connections CONNECTION Read this first: 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) After making all the connections, connect the AC power cords of the devices. • Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures may be distorted due to the copy protection system. Antenna Connection (Required) Basic Setup Disc Management Recording Playback rear of this unit RF coaxial cable ANT. IN This connection is for TV loop through only OUT VHF / UHF antenna IN ANTENNA RF coaxial cable or cable TV company Note Choose one of the following connections depending on the jacks on your TV. • For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before moving the unit. • If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions. • ANTENNA OUT jack is for tuner pass through only. DVD playback through the RF is not possible. Supplied cables used in this connection are as follows: • RF coaxial cable x 1 Please purchase the rest of the necessary cables at your local store. Overview Higher Quality If Your TV has HDMI IN COMPONENT VIDEO IN Standard Quality S-VIDEO IN R L AUDIO IN VIDEO IN Refer to page 22 page 21 page 21 page 20 If you are using cable / satellite box page 23 If your device has only an ANT. IN jack ANT. IN page 24 EN 19 Editing Function Setup VCR Function Others &4,6%@%73,6@&/@WJOEE