Toshiba Excite AT300SE PDA0DC Users Manual Canada; English - Page 33
Factory Reset, MTP Media Transfer Protocol device or PTP Picture Transfer Protocol
View all Toshiba Excite AT300SE PDA0DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
TOSHIBA AT300SE series 1. Plug the Micro USB connector of the USB cable into the Micro USB port on this tablet. Figure 4-2 Connecting an USB cable 1 2 1. Micro USB port 2. Micro USB connector 2. Plug the other end of the USB cable into the USB port on the computer. Depending on your settings, your tablet will be recognized as a removable MTP (Media Transfer Protocol) device or PTP (Picture Transfer Protocol) device allowing you to access its contents from a computer. If your computer does not support MTP, try using PTP for connection. To remove this tablet from a computer: 1. Make sure all file operations are finished. 2. Unplug the tablet from your computer. Make sure the connector is properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins. Factory Reset The tablet provides you with the function to reset it. Before executing the reset, you need to backup the system settings, application settings, user installed applications and data in the internal storage. To perform the factory data reset, please follow the steps below: 1. Tap All Apps -> Settings -> Backup & reset -> Factory data reset > Reset tablet -> Erase everything. 2. The factory data reset will be done. Please note that the following data will be erased: System settings and application settings User installed applications Internal storage files, such as music or photos Data in the removable media will not be erased. User's Manual 4-8