Toshiba HD-XA1 Owner's Manual - English - Page 60
Before calling service personnel
UPC - 022265412060
View all Toshiba HD-XA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6 Chapter Others Before calling service personnel If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest Toshiba dealer. Symptom No power. No picture. No sound. Multi channel sound is not output. The disc does not play. Playback picture has noise. The remote control does not work. Screen freezes and no buttons work. Remedy . Is the power plug disconnected? Check the power connection. . Is the cable for connecting the player and TV disconnected or not connected properly? Check the connections ( page 20 - 23) . Switch the input of the connected TV to the signal from the player. . When the TV is connected via the component jacks or HDMI jacks, images from the player may temporarily not be able to be displayed because of the selected output and resolution. Use the V.OUTPUT and RESOLUTION buttons to change the output and resolution ( pages 21 and 22). . Is the audio cable disconnected? ( page 20) . Is the volume of the device turned down to the minimum level? Check the volume. . Switch the audio input of the device connected by the audio cable to the input from the player. . Set "Digital out SPDIF" or "Digital out HDMI" ( page 53) properly in accordance with the connected device and connection procedure. . The volume level is set to the minimum. Adjust the volume. ( page 54) . Is the HDMI output selected? To listen to HDMI audio, press V.OUTPUT and select HDMI output. . Set "Speaker Setting" ( page 53) to "5.1ch." . Make sure the disc type can be played with the player ( page 26). . Is the disc dirty or scratched? Check or clean the disc. ( page 27) . If the disc is a DVD-RW or DVD-R disc, finalize the disc before attempting to play it with the player. . If the disc includes parent lock support, playback is restricted while the parent lock of the player is set. Cancel Parental Lock ( page 56) or change the restriction level. . If video from the player is watched via a video recorder or on a TV with a built-in video recorder, the copy guard may prevent images from being displayed properly. Be sure to connect the player directly to the TV. . Are the batteries of the remote control dead? Replace the batteries. ( page 16) . Make sure the remote control is within range and pointed in the correct direction. . Pressing the ON/STANDBY button on the player for approximately ten seconds forces the player to turn off. Turn the player off and then on again. 60