Toshiba IK-WB16A Quick Start Guide - Page 20
Assigning IP Address - w ip network camera
View all Toshiba IK-WB16A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Assigning IP Address 1. Install the "Installation Wizard" under the Software Utility directory from the CDROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program. Installation Wizard 3. The program searches for other Network Cameras on the same network. 4. After searching, the main installer window will pop up. Click on the MAC that matches the one labeled on the side of the camera lens to connect to the Network Camera. MODEL No. IK-WB16A DC INPUT:12V 0.8A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: B1010XXXX MAC:0002D1714270 00-02-D1-71-42-70 169.254.0.99 IK-WB16A 0002D1714270 NOTE l If "Installation Wizard" does not perform normally or the camera can not be found during the search even though the camera and a PC are connected correctly, please switch off the wireless LAN of a PC. l Installation Wizard can search the location of the Network Camera even though DHCP is not used on the network. Reassign the static IP address because IP address of the Network Camera has been set 169.254.*.* by default. 20