Toshiba IK-WB16A Quick Start Guide - Page 22

Configure the Wireless Connection (IK-WB16A-W only) 1. Check the SSID and wireless security currently set on your wireless access point (AP). 2. Go to IK-WB16A-W's Configuration > Wireless. 3. Set the SSID and wireless security consistent with the setting on your AP. 4. Select the Wireless mode as "Infrastructure". 5. Click Save. The Network Camera will reboot. 0100c5 6. Wait for the live image to refresh in your browser. Then, unplug the power cable and Ethernet cable from the Network Camera. 7. Replug the power cable to the camera. The Network Camera now operates in wireless mode. ADSL/Cable/Switch 4321 WPS/RESET microSD AP POWER COLLISION 1 2 3 4 5 LINK RECEIVE PARTITION NOTE 1. SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless network. The IK-WB16A-W's factory SSID setting is set to "default". 2. Select "Ad-Hoc" wireless mode if you want the IK-WB16A-W to communicate without using an AP or wireless router. 3. Wireless networking has many security issues. It's very important that you define effective wireless security policies that guard against unauthorized access to important resources. For further setup, please refer to user's manual on the CD-ROM. 22