Toshiba L505D S5986 User Manual - Page 110
Power-up modes, Supervisor password, Starting the computer by password, Windows utilities
UPC - 883974310128
View all Toshiba L505D S5986 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
L500/L505/L500D/L505D Supervisor password If you set a supervisor password, some functions will be restricted when a user logs on with the user password. To set a supervisor password: TOSHIBA Assist -> SECURE -> Supervisor password This utility lets you do the following: ■ Register or delete the supervisor password. ■ Specify restrictions for general users. Starting the computer by password If you have already registered a password, there is a way to start the computer: ■ Enter the password manually. The password is necessary only if the computer was shut down in boot mode or Hibernation Mode, not in Sleep mode. To enter a password manually, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message will appear in the LCD: Enter Password [xxxxxxxx] At this point, the hotkeys Fn + F1 to F9 do not work. They will function after you enter the password. 2. Enter the Password. 3. Press Enter. If you enter the password incorrectly three consecutive times, the computer shuts down. You must turn on the computer again and re-enter the password. Power-up modes The computer has three power-up modes: ■ Hibernation (saves data in memory to the hard disk) ■ Sleep (power remains on, maintaining the data in memory, but the CPU and all other devices effectively enter a "sleep" mode) ■ Boot (does not save data in memory) Refer also to the section Turning off the power in Chapter 3, Getting Started. Windows utilities You can configure various settings associated with both Sleep Mode and Hibernation Mode within the Power Options. To access it, click Start -> Control Panel -> System and Security -> Power Options. 6-12 User's Manual