Toshiba MEG-F10 Owners Manual - Page 31
Charge Using the USB CRADLE, Charge with Connected to PC Using USB Cable
View all Toshiba MEG-F10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Charge Using the USB CRADLE Connect the gigabeat to the USB CRADLE, then make further connections in the order indicated in the diagram below. Welcome Getting Ready Using the Product 3 Connect to the outlet. 1 2 When removing the gigabeat from the USB CRADLE, pull straight out in the direction of the arrow ( ) in the above diagram. Charge with Connected to PC Using USB Cable Connect the gigabeat to the PC with the supplied USB cable. To the USB connector of the PC When the gigabeat does not transfer tracks and does not function even though there is a USB connection has been made and there is charging, it is possible that the battery is weak. Charging with a USB connection is dependent on the performance of the USB bus power supply function of the PC and might not be possible depending on the model of PC. When a USB connection is made with a PC that cannot support charging, the connection may soon be lost and the USB function of the PC may not be available for use temporarily. If this happens, restart the PC, connect the AC adapter to the gigabeat, and then once again make a USB connection with the PC. 31 gigabeat F60/40/20_OP16-32(E) 31 05.3.8, 0:03 PM Other Helpful Information