Toshiba NB525 Users Manual Canada; English - Page 102
Real Time Clock
View all Toshiba NB525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
NB500/NB505/NB520/NB525/NB550D/NB555D Series Real Time Clock Problem Procedure The following message is Displayed on the screen: The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps: ERROR 0271: Check 1. Turn on the computer. date and time settings. WARNING 0251: System CMOS checksum bad - 2. Press the F2 key when the TOSHIBA Leading Innovation >>> screen appears - the BIOS setup application will load. 3. Set the date in the System Date field. Default 4. Set the time in the System Time field. configuration used. 5. Press F10 - a confirmation message will be Press to displayed. resume, to Setup. 6. Press the ENTER key - the BIOS setup application will end and the computer will restart. Keyboard Keyboard problems can be caused by the setup and configuration of the computer - please refer to the section The Keyboard in Chapter 3, Operating Basics, for further information. Problem Some letter keys produce numbers Output to screen is garbled Procedure Check that the numeric keypad overlay is not activated - press the FN + F11 hot key and try typing again. Please refer to your software's documentation to ensure that its is not remapping the keyboard in any way (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact your reseller, dealer or service provider. User's Manual 6-7