Toshiba PA3575U-1PRP dynadock U dynadock U User's Guide - PS3575U - Page 22
USB 2.0 Ports, Ethernet Port, When the dynadock, is not connected to your computer, or
View all Toshiba PA3575U-1PRP dynadock U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
dynadock™ When the dynadock is not connected to your computer, or the computer's power is off Press the Undock button once to put the dynadock into charging mode. The Status LED will glow orange when charging. Press the Undock button again to stop the charging process. This applies to both USB powered ports on the front of the dynadock. These ports charge select USB peripherals (for example, PDA, MP3 Players and Cell phones) even when undocked. NOTE: When the dynadock is not connected to your computer, or the computer's power is off, only two front USB ports have the charge function. The charge and non-charge function depends on the charge mode setting in the dynadock utility. See page 38 for setting the charge mode. Not all devices can be charged through these ports. USB 2.0 Ports Connect any USB device to one of the dynadock's six USB ports. n If your USB device, such as a printer or optical drive, etc., came with its own AC adaptor, make sure that it is plugged into the device and a live electrical outlet. Ethernet Port Connect one end of a network cable (not provided) to the Ethernet port (RJ-45) on the dynadock and the other end to your network for high performance network access. To configure the network properties of the Ethernet adapter: In Windows Vista®, select Start > Control Panel > View network status and tasks > Manage network connections. In Windows® XP, select Start > Connect to > Show all Connections. In the Network Connections folder, double-click the connection icon for the dynadock's Ethernet adapter, which is indicated by ASIX AX88772A USB2.0 to Fast Ethernet Adapter. This will open the Local Area Connection Properties window for you to configure the network settings as required according to your network environment. If you are unsure about the settings, consult your network administrator for assistance. NOTE: The LAN port does not support wake-up-on-LAN. The Local Area Connection icon in the System Tray/Notification Area will not show a connection. Open "Network Connections" to view the Ethernet Connection. EN-22 User's Manual