Toshiba PA3575U-1PRP dynadock U dynadock U User's Guide - PS3575U - Page 29

dynadock™ Video Port (VGA and DVI) Connection The dynadock has both the following types of video ports: VGA - for connection to VGA interface monitors DVI - for connection to DVI interface monitors NOTE: Only one monitor can be connected to the dynadock. Although the ports and video drivers are different, the connection and setup is the same. Connect the monitor cable (not provided) to the video output port on the dynadock and the external monitor. This cable can be connected and disconnected any time without disconnecting the dynadock from the USB port on your computer. NOTE: The dynadock should be connected to a USB 2.0 port for optimal video performance. The dynadock will work when connected to a USB1.1 port, however video performance will be compromised. The USB connector may be plugged and unplugged while the dynadock is on. You can customize the video settings of the dynadock. See Adjusting Video Settings for more information. Viewable screens The dynadock video drivers give you the option of viewing a total of three screens. 1. The screen on the notebook 2. An external monitor connected to the video port on the notebook (if available) 3. An external monitor connected to the dynadock NOTE: The external monitor connected to the dynadock may be identified as either "2" or "3" on the Windows® Display Properties screen (depending on your model) although there may not be a total of 3 viewable screens. Video Modes The dynadock video output works in two modes: n Mirror Mode n Extended Mode User's Manual EN-29