Toshiba PA3686U-1SET dynadock wireless User Manual - Page 20
Setting Up the dynadock™ and Connecting Peripherals, Setting up the dynadock™, Assemble the dynadock
View all Toshiba PA3686U-1SET dynadock wireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 Setting Up the dynadock™ and Connecting Peripherals Setting up the dynadock™ This section provides instructions on setting up the dynadock™. You will need to perform the following steps in the order shown: 1 Assemble the dynadock™ 2 Connect the power adaptor 3 Install the software 4 Connect the dynadock™ to your computer You may either: a Set up a wireless connection OR b Set up a USB cable connection For more information on each step, refer to the appropriate section on the indicated page. Assemble the dynadock™ Slide the dynadock™ onto the base as shown below. (Sample Illustration) Attaching the base to the dynadock™ 20
20
Chapter 1
Setting Up the dynadock™
and Connecting Peripherals
Setting up the dynadock™
This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1
Assemble the dynadock™
2
Connect the power adaptor
3
Install the software
4
Connect the dynadock™ to your computer
You may either:
a
Set up a wireless connection
OR
b
Set up a USB cable connection
For more information on each step, refer to the appropriate section
on the indicated page.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™