Toshiba PA3927A-1PRP dynadock U3.0 Dynadock U3.0 User Manual - Page 23

Setting Up the dynadock™ and Connecting Peripherals 23 output ports. (See "Adjusting audio settings" on page 27 for more information.) NOTE If there is no audio device connected to the dynadock™, the computer's audio ports may remain enabled. NOTE If you make any changes to your audio settings, audio ports and the dynadock, you may need to restart your media player for those changes to take effect. Connecting USB devices The dynadock™ provides four USB 3.0 ports and two USB 2.0 ports to connect peripheral devices to: two USB 3.0 ports and two USB 2.0 ports on the back and two USB 3.0 ports on the front. This section provides basic instructions for connecting most USB devices to the dynadock™. Please check the documentation that came with your USB device for any special instructions. NOTE You do not need to turn off the dynadock™ or the docked computer before connecting a USB device. To connect a USB device to the dynadock™: 1 If your device came with its own AC adaptor, connect the AC adaptor to the device and to a live electrical outlet. 2 Use a USB cable to connect the device to one of the USB ports on the dynadock™. 3 Wait for Windows® to recognize the device and install the drivers. A message should display on your computer screen indicating when installation is complete and the device is ready to use. NOTE If you want to charge your USB device when the computer connected to the dynadock™ is off or when there is no computer connected to the dynadock™, be sure to connect your device to the powered USB port on the front of the dynadock™.For more information, see "Charging USB devices using Toshiba USB Sleep and Charge" (page 30).