Toshiba PA3927A-1PRP dynadock U3.0 Dynadock U3.0 User Manual - Page 28

28 Using the dynadock™ and Adjusting Settings the computer, the audio ports on the computer are automatically re-enabled. To change the default settings, you may need to manually adjust the audio settings in Windows®, as described in this section. For example, if you want to use the computer's audio ports while the computer is docked, you will need to change the default settings. Configuring audio playback ports 1 Click the dynadock U3.0 icon in the system tray/notification area of your Windows® desktop. (Sample Image) TOSHIBA dynadock™ U3.0 icon NOTE If the icon is not visible in your system tray/notification area, make sure the dynadock™ is connected and docked, and then click the Show Hidden Icons button ( ), if necessary, to display hidden icons. 2 Select Audio Setup from the menu. 3 On the Playback tab of the Windows® sound settings dialog box, select one of the following: ❖ To use the dynadock's Headphone/Speakers/Line out jack, select dynadock Audio device. ❖ To use the docked computer's Headphone/Speakers/Line out jack, select the appropriate playback device (other than dynadock Audio device). 4 Click Set Default. 5 Click OK. NOTE If you make any changes to your audio settings, you may need to restart your media player for the audio changes to take effect. Configuring 5.1 surround sound 1 Click the dynadock U3.0 icon in the system tray/notification area of your Windows® desktop. (Sample Image) TOSHIBA dynadock™ U3.0 icon NOTE If the icon is not visible in your system tray/notification area, make sure the dynadock™ is connected and docked, and then click the Show Hidden Icons button ( ), if necessary, to display hidden icons.